BJD GUIDE

BJD care guide

Resin is durable but sensitive to light, heat and dyes. A few simple habits keep your doll beautiful for years.

01

Cleaning

Wipe dust off with a soft brush or microfibre cloth. Remove marks on bare resin with a melamine sponge used gently and only lightly damp. Never wipe the face-up with water or solvents, and avoid alcohol, acetone and strong cleaners on painted areas.

02

Yellowing and UV light

All resin slowly turns yellow over time; ultraviolet light and heat speed it up. Keep dolls out of direct sunlight, avoid displaying them under strong fluorescent light, and store them in their box or a closed cabinet when not on display. Yellowing is natural and cannot be fully reversed.

03

Storage

DOLLSN official default doll box (horizontal & vertical types available)
DOLLSN official default doll box (horizontal & vertical types available)
DOLLSN protective dust bag inside the default box
DOLLSN protective dust bag inside the default box
  • Store the doll lying down in its box with protective cotton padding or a dust bag, or in a padded carrier bag.
  • Keep it in a cool, dry place away from heaters and humidity.
  • Remove eyes or wigs held with sticky putty for long storage so residue does not build up.
04

Stringing

Elastic loosens with age and use. If your doll cannot hold a pose, its limbs droop or the joints feel loose, it is time to restring. Use elastic of the right thickness for the size and keep the tension firm but not so tight that it stresses the resin.

05

Dyes and staining

Dark or freshly dyed fabrics, leather and some wig caps can permanently stain resin. Pre-wash clothes, choose light colours for skin-tight items, or put a thin layer (such as tights) between the outfit and the resin.

06

Handling

  • Hold the doll by the torso and pelvis, never by the head or a single limb.
  • Wash your hands or wear cotton gloves to avoid oils and marks.
  • Do not leave a doll leaning in extreme poses for a long time, and keep it away from pets and small children.
07

How to Attach & Remove a BJD Head (S-Hook Guide)

Attaching or removing a BJD head uses the metal S-hook at the top of the neck. Follow these 3 easy steps to connect or detach the head safely without pinching your fingers or chipping the resin.

DOLLSN 3-step visual guide to attaching a BJD head with an S-hook
DOLLSN 3-step visual guide to attaching a BJD head with an S-hook
  • Step 1 · Place the head over the S-hook: Align the neck opening of the head with the S-hook protruding from the neck and slide the head onto it.
  • Step 2 · Loop a ribbon or Head Puller: Hook a strong ribbon, cord or a dedicated DOLLSN Head Puller under the S-hook.
  • Step 3 · Pull up slightly and turn 90 degrees: Gently lift the S-hook upward, rotate it 90 degrees, and let it settle into the inner groove inside the head. Lifting slightly makes it turn effortlessly; repeat in reverse to remove the head.